Share this article
Excavator Machine Control Guide: How 2D Grade Control Works
Every grade check that stops an excavator costs time. The operator waits, a grade checker climbs into the trench with a rod, and the crew hopes the last few passes didn't go too deep. Excavator machine control changes that by showing the operator exactly where the bucket teeth are compared to grade, right in the cab.
If you're a contractor, utility crew, or site developer in Central Texas wondering whether machine control is worth it, this guide explains how it works, the difference between 2D and 3D systems, which jobs benefit most, and what a system like iDig Touch 2D costs.
United Surveying Supplies sells, installs, and supports iDig 2D machine control from our shop in Round Rock, Texas.
What Is Excavator Machine Control?
Excavator machine control is a system of sensors and an in-cab display that tells the operator where the bucket's cutting edge is relative to a target depth or slope.
Sensors on the machine measure the angles of the body, boom, stick, and bucket. Combined with the machine's dimensions, the system calculates the position of the bucket teeth in real time. The operator sees cut, fill, or on-grade on a screen and light bar without stopping for someone to check.
Machine control doesn't replace a skilled operator. It gives a good operator the information needed to hit grade faster, with fewer passes and less guesswork.
2D vs. 3D Machine Control
2D machine control works from a reference set on site, most commonly a rotating laser. The system knows the bucket's depth and slope relative to that reference, which makes it ideal for trenches, pads, footings, and slopes built to a set depth or grade.
3D machine control uses GNSS (GPS) positioning, and sometimes a robotic total station, together with a digital design model. The system knows where the machine is on the site and what the design grade is at that exact spot. That's powerful for complex surfaces, but it requires a base station or correction service, design files, and a larger investment.
For many excavator crews, 2D covers most daily work at a much lower cost. iDig also offers an upgrade path to 3D GPS/GNSS machine control when your projects demand it.
How iDig Touch 2D Works
iDig Touch 2D is grade control for excavators of any make or model. It uses wireless, solar-charged sensors on the machine, a touch-screen in the cab, and the rotating laser you may already own. It works in three steps:
- Set up your laser. Set your rotating laser on site and shoot a reference point, such as a benchmark, control point, or finished floor, to establish the laser height.
- Catch the beam. Raise the stick through the laser beam. The receiver on the stick sensor catches it, and iDig now knows the height of the teeth against your design grade.
- Dig to grade. The screen and LED light bar show cut, fill, and on-grade in real time. Move the machine, catch the beam again, and keep digging.
The sensors connect wirelessly over Bluetooth and use magnetic, solar-powered mounts, so there are no cables to route along the boom and stick.
What the Operator Sees in the Cab
The in-cab touch-screen and LED light bar give the operator live grade information anywhere within the machine's reach.
iDig Touch 2D includes:
- Depth & grade: teeth vs. grade, live, with cut/fill arrows
- Slope: dig on a set slope across the reach
- SmartTape: distance, height difference, and slope between two points
- Angles & tilt bucket: bank angles, bucket-bottom angle, and tilt-bucket support
- Offsets: shift the target for bedding, base, or fine grade
- Height alarm: warns before the arm gets near power lines or roofs
Want to see it in action? Our Machine Control page has an interactive walkthrough of how the sensors work and how iDig calculates teeth height.
Jobs That Benefit Most From 2D Machine Control
2D machine control is a strong fit for any job where the crew digs to a set depth or slope, including:
- Trenching for water, sewer, and storm lines
- Utility and drainage work
- Footings and foundations
- Ponds and detention basins
- Slope and batter work
- Building pads and general site prep
If your excavators spend much of the day digging to grade, machine control can pay off quickly.
Benefits of Machine Control on the Jobsite
The biggest gains come from keeping the machine digging instead of waiting on grade checks:
- Less stopping to check grade with a rod or tape
- Less over-excavation, rework, and wasted backfill
- Fewer workers in the trench while the machine is running
- No GPS base station or correction subscription required for 2D work
- More consistent results from operator to operator
Keeping people out of the trench is a safety benefit, not just a time saver.
Your Rotary Laser Is Part of the System
A 2D system like iDig gets its height reference from a rotating laser, so the laser on site matters.
A self-leveling laser like the Spectra Precision LL300N covers level work such as pads and footings. For design slopes on drainage or sloped pads, a grade laser like the Spectra Precision GL412N lets you set an exact slope on one axis. Not sure which fits your work? Read our guide to Spectra lasers & accessories.
Keep your laser calibrated, too. If the laser is off, every grade the machine digs is off with it. United Surveying Supplies offers rotary laser calibration in Round Rock.
What Does iDig Touch 2D Cost?
The iDig Touch 2D full system is $11,525. It's a complete system, including mounts for the first machine:
- Touch-screen control box and LED light bar
- Wireless sensors: 2D body, boom, combo stick (laser receiver), and bucket
- Sensor plates, monitor cradle, light bar mount, and power cable
Running more than one excavator? A machine-ready kit is $1,050 per additional machine and includes sensor plates, a monitor cradle, a light bar mount, and a power cable. Once each machine is installed and calibrated, you can move one iDig system between machines: clip it in and dig.
Contact us to confirm current pricing, installation, and training for your fleet.
Is Machine Control Worth It?
Payback depends on how often your excavators dig to grade, your labor rates, and how much rework and extra material you deal with today. Savings usually come from fewer grade-checker hours, less over-dig and backfill, and finishing jobs in fewer days.
Use the ROI calculator on our Machine Control page to enter your own crew, rates, and production and see estimated payback, savings per year, and savings per grade day.
Estimates aren't guarantees. Actual savings depend on your crew, soils, projects, and how the system is used.
Where to Buy Excavator Machine Control in Texas
United Surveying Supplies is a surveying and construction supply store in Round Rock, Texas, serving contractors, utility crews, surveyors, and engineers across Central Texas. Our dedicated machine control specialist handles iDig sales and installation, and we offer demos, training, and support. We sell new equipment only.
We also stock the rotary lasers, receivers, and grade rods that pair with 2D machine control, and we calibrate them in-house.
United Surveying Supplies
17016 Joe Barbee Dr, Ste 100
Round Rock, TX 78664
512-428-6753
Frequently Asked Questions About Machine Control
What is 2D machine control?
2D machine control uses sensors on an excavator to show the operator real-time depth and slope in the cab, using an on-site reference such as a rotating laser instead of a GPS base station.
Does iDig work on any excavator?
iDig Touch 2D is designed for excavators of any make or model, with standard or tilt buckets.
Do I need GPS for iDig 2D?
No. iDig 2D works from a rotating laser and on-machine sensors, so no GPS base station or correction subscription is required. An upgrade path to 3D GPS/GNSS machine control is available.
Can I move iDig between excavators?
Yes. Add a $1,050 machine-ready kit to each additional excavator. Once each machine is installed and calibrated, you can move one system between them.
Where can I see an iDig demo near Austin, TX?
Contact United Surveying Supplies in Round Rock, TX, at 512-428-6753 for an iDig demo, training, and support.
Get Grade Control on Your Excavator
Machine control helps operators dig to grade faster, with less rework and fewer people in the trench.
If you're ready to see iDig Touch 2D on your machine, contact United Surveying Supplies for a demo, or call our shop at 512-428-6753.



