Explore iDig Touch 2D – United Surveying Supplies
Dig Assist
iDig Touch 2D — see how grade control works
Language / Idioma
United Surveying Supplies USS DigAssist · v1.0
USS
USS Dig Assist iDig Touch 2D machine control demo
0:00 / 0:00
0:00 / 0:00

1 Excavator size

Make & model
Bucket

2 Job or feature

3 Spectra laser

Beam

4 Present & share

Export video plays the selected machine, job and laser once at 1× and saves it when it ends — keep this tab in front while it records.

Side-view illustration for customer demos. Make & model machines use published dig depth, reach and tail swing with generic proportions and paint only — no logos. Depths and slopes are typical examples — always build to your plans and local code. Laser specs from Spectra Precision literature; confirm before quoting.

How iDig measures Sensors, machine geometry, distance, slope & height

How to use DigAssist

An animated walkthrough of iDig Touch 2D on an excavator. Pick a combination and press play.

    Explore iDig Touch 2D Excavator grade control · United Surveying Supplies

    Dig to grade without a grade checker

    iDig Touch 2D is grade control for excavators of any make or model. Wireless, solar-charged sensors on the machine and a touch-screen in the cab show the operator exactly how far the bucket teeth are above or below grade — live, anywhere in reach — using the laser you already own.

    How it works in three steps

    1
    Set up your laser Set your rotating laser on site and shoot a reference point — a benchmark, control point or finished floor — to establish the laser height.
    2
    Catch the beam Raise the stick through the laser beam. The receiver on the stick sensor catches it, and iDig now knows the teeth height against your design grade.
    3
    Dig to grade The screen and LED light bar show cut, fill and on-grade in real time. Move the machine, catch the beam again and keep digging.

    What the operator gets

    Depth & grade Teeth vs grade, live, with cut/fill arrows
    Slope Dig on a set slope across the reach
    SmartTape Distance, height difference and slope between two points
    Angles & tilt bucket Bank angles and bucket-bottom angle; tilt-bucket support
    Offsets Shift the target for bedding, base or fine grade
    Height alarm Warns before the arm gets near power lines or roofs

    Built for civil work

    What's in the system

    iDig Touch 2D full system

    $11,525
    Complete system, including mounts for the first machine
    • Touch-screen control box and LED light bar
    • Wireless sensors: 2D body, boom, combo stick (laser receiver) and bucket
    • Sensor plates, monitor cradle, light bar mount and power cable

    Machine-ready kit

    $1,050
    Per additional machine — move one system between machines
    • Sensor plates, monitor cradle, light bar mount and power cable
    • Installed and calibrated once — clip in the system and dig

    How the sensors work

    Press play or tap a step. Each step animates one idea: the four sensors, the machine measurements, how angles become teeth height, the laser catch, depth, offsets, SmartTape distance, angles, slope and the height alarm.

    Tip: turn your phone sideways for the best view.

    Try it yourself

    Drag the bucket or use the sliders to move the boom, stick, bucket and tilt. Every sensor, the grade reading and the light bar respond live. Pick a machine, units and a standard or tilt bucket at the top.

    Tip: turn your phone sideways for the best view.

    ROI on civil projects

    Pick the kind of work you do, then adjust any number to match your crew. Values are saved on this device. Starting values are examples only — use your own rates and production.

    Type of work
    Payback —
    Savings per year —
    Savings per grade day —
    ROI —
    Cumulative savings after investment
    Where the savings come from (per year)
    What if you only see part of the savings?

    Estimates only, based on the numbers entered — not a guarantee of results. Actual savings depend on your crew, soils, project and how the system is used.

    United Surveying Supplies · Round Rock, Texas
    Want to see iDig on your machine? Contact United Surveying Supplies for a demo, training and support.